Which original parts can the installer keep?
Work through the following decisions for each cart configuration. Mark each original part as retain, replace or confirm before ordering. A part marked for confirmation should have an owner and an open question on the quotation.
| Cart equipment | Retain when | Replace and itemize when | Confirm before ordering |
|---|---|---|---|
| Charger and charge port | The programmed curve suits the proposed pack and the existing port and wiring match. | The project requires a different charger, inlet or charge lead. Quote the affected parts individually. | Check the charger model, selected profile, port and mating connector. |
| Tray and hold-downs | The drawing shows the pack can be secured to the original fixing points with service access. | A bracket or a different hold-down is needed. Identify the mounting hardware supplied. | Locate the fixing points, measure the usable opening and check clearance beneath the seat. |
| Controller and accessory supply | The agreed pack configuration supports the controller demand and the existing accessory supply. | The agreed design changes a harness, gauge or accessory power supply. Identify each affected item. | Check the controller version, load demand and how the lights and gauges are powered. |
What does the 50Ah battery line on the quote cover?
Use the 48V 50Ah golf cart lithium battery as a starting point. Its published market class is 48V and its rated capacity is 50Ah. Confirm nominal voltage for the vehicle configuration, housing dimensions and terminal layout on the approved project drawing, and chemistry on the final bill of materials. If purchasing requires a specific chemistry, name it in the inquiry and have the supplier repeat it on the quote.
For example, a fleet wants to keep its trays but has yet to identify the original charger profile. Quote the battery on its own line. Compare the fixing points with the proposed drawing before adding a bracket. Quote a matching charger as a separate option pending the profile check. The installer can then see what will arrive, and the buyer can price the work without paying twice for a part already on the cart.
How should a fleet request comparable offers?
Group carts by model year, tray layout and controller version, then give the quantity in each group. List vehicles with a modified charge port or an aftermarket controller separately. For checks elsewhere on the vehicle, including regenerative braking and accessory power, use the golf cart lithium upgrade checklist.
Send each group’s retain, replace and confirm list, and mark the parts you intend to keep. Request separate lines for the battery, charger, mounting hardware and wiring, with the supply scope and any open option identified on each line. For other configurations, see the golf cart battery range.
Request an itemized battery or conversion quote for my golf carts
NEW JOURNEY