Language · English

CUSTOM OEM PROJECTS

Custom OEM Battery Packs for Your Application

Bring the equipment requirements, a drawing or an existing battery reference. New Journey helps turn those inputs into a defined configuration and sample discussion.

Explore the guide
12S 16000mAh 25C UAV Battery
12S 16000mAh 25C UAV Battery

Start with the equipment you need to power

A custom battery enquiry is most useful when it describes the equipment, not just a capacity. Explain what the battery powers, how the equipment draws current and where the assembly will be installed. An existing drawing or battery sample reference can give the discussion a concrete starting point.

New Journey’s product scope includes UAV packs, motive power batteries, embedded equipment packs and individual cells. The company brings selection, configuration discussions, sample coordination and order follow-up into one project conversation. Configuration and supply requirements are agreed with manufacturing partners; a catalogue listing is not a promise that every proposed combination can be supplied.

Choose the appropriate starting point

Your projectWhere to beginMain information to bring
Aircraft battery integrationUAV and Drone BatteriesVoltage range, load, battery-bay drawing and installed mass limit
Mobility or automated equipmentMotive Power BatteriesDrive-system requirements, charging arrangement and installation details
Portable instruments or electronic equipmentEmbedded Battery PacksEnclosure dimensions, protection requirements, wiring and connector details
Your own pack developmentBattery CellsCell requirements, assembly design and the scope of work your team will perform

For a UAV brief, the 12S 16000mAh 25C UAV Battery shows how a finished pack specification records electrical limits, dimensions, mass and connections together. For a different application, the 7.4V 5000mAh Embedded Equipment Battery Pack lists configuration and connector options. Use an applicable model as a reference and identify the changes you require; do not treat models from different families as direct replacements.

What to include in your enquiry

Brief itemDetails that make the discussion actionable
Application and loadEquipment function, continuous current and any peak requirement with its duration
Voltage architectureNominal voltage, accepted voltage range and series count where fixed
CapacityRequired charge capacity or energy requirement, with the basis for the requirement
Mechanical fitDrawing with dimensions, mounting method, clearance, lead exit and maximum mass
ConnectionsPower and balance connectors, mating parts, polarity, cable requirements and pinout
CommunicationRequired protocol and interface specification, if communication is part of the project
ProtectionRequired functions and where they are implemented in the battery or host equipment
ChargingCharger information, charging current, balance method and operating procedure
EnvironmentOperating and storage conditions that the configuration must address
Documents and quantityRequired tests or certification scope, destination, sample quantity and order quantity

Communication, protection and testing requests are requirements to assess, not standard features implied for every battery. Identify which points are fixed and which can change. If you have an existing battery, include its label, dimensional drawing and interface details without assuming that appearance proves electrical equivalence.

Send your application brief with the available information. Unresolved items can be raised as questions during the configuration discussion.

A clear path from enquiry to supply

Your requirements

Share the application, load and fit. State the limits the configuration must meet and identify any reference product, drawing or sample. For aircraft projects, the UAV pack selection checklist provides a focused starting point.

Defined configuration

Discuss the model, interfaces and quotation around the same configuration. Resolve voltage, dimensions, wiring and charging questions before treating the proposal as agreed. Ask which documentation applies to that model and revision; a report for a different assembly does not settle your requirement.

Sample review

Agree the checks your team will perform on the sample, including physical fit, interface compatibility and behaviour under the intended operating conditions. Record required changes so the sample discussion and order description refer to the same configuration. Sample review is a project step, not a claim that an untested assembly is approved for your equipment.

Order & support

Confirm the order details, agreed configuration and follow-up requirements. Keep model and revision references attached to the relevant documents. This is the same four-step workflow presented by New Journey: requirements, configuration, sample review, then order and support. The project process page explains the company’s approach.

Decide how much integration you need

Some teams need cells for an assembly they will design and qualify. Others need a finished pack with defined leads, housing or wrapping and a clear installation interface. Make that scope explicit before discussing a specification. The cells and finished packs guide helps distinguish the two purchasing routes.

Bring the next decision into focus

You do not need to select every component before contacting New Journey. You do need to distinguish the equipment’s fixed limits from open design choices. Discuss your custom OEM battery project with the application, drawing or sample reference, target quantity and the questions you need resolved.

Before requesting a replacement UAV battery, establish whether the aircraft accepts a removable pack through documented electrical interfaces or depends on a controlled battery, dock or built-in assembly. That distinction determines whether the enquiry is for a pack, an installation project, or an engineering assessment of interfaces. A voltage label and a physically similar connector do not establish compatibility.

Separate the operating arrangements

Aircraft arrangementFirst question for the buyerWhat the enquiry should define
Removable pack in a trayCan the original pack be removed and connected without changes to the aircraft?Tray envelope and removal direction, restraint, connector position and pinout, voltage window and current profile
Dock or automated charging stationWhat must the aircraft and dock detect before charging or dispatch?Dock output profile, contact locations, charging enable, pack identification, state reporting and fault recovery
Built-in or cell-to-body assemblyIs the battery a serviceable assembly and what work does replacement require?Accessible service boundaries, mechanical interfaces, system drawings and the aircraft maker’s service requirements
Battery with a communicating management systemWhich signals does the controller require before power-up and operation?Protocol documentation, message behaviour, startup and shutdown sequence, fault states and acceptance tests

A communication label alone is not a complete interface. Record what permits charging to start, what signals allow the aircraft to operate, how a fault is reported and what must occur before the system can resume. Supply available interface documentation and agree who is responsible for changes to aircraft-side equipment.

Draw the complete removal and charging path

Provide the battery bay opening as well as the usable internal envelope. Show the pack’s orientation, extraction path, latch and restraint locations, cable bend space and the position of charging contacts relative to mounting points. If a dock, harness, adapter or tray must be modified, list it separately in the project scope. A custom drawing and sample test plan should identify the parts supplied with the battery and the parts retained on the aircraft.

Treat published ratings as starting information

The 12S 16000mAh 25C UAV battery is one published candidate for a project with a suitable electrical window. Its source performance figure is not an approval of the completed assembly, connector or harness. Give the team the actual continuous and transient aircraft demand, duration and charging arrangement so the complete current path can be assessed. Approval requires the agreed configuration and sample acceptance, including aircraft-side interfaces.

Put the required evidence in the enquiry

Send the aircraft and original battery identification, input-voltage window, required capacity, current profile, charger or dock information, drawings and available interface documentation. Identify which parts must remain on the aircraft and describe the intended installation and charging sequence. Ask for the proposed pack, any separately scoped interface work, and the tests needed before a sample can enter service.

Discuss the replacement or custom assembly · Review the UAV battery catalog

TALK TO NEW JOURNEY

Bring your application into focus.

Share the voltage, load, drawing and quantity for a configuration discussion.

Discuss your requirements