New Journey’s 24S 40000mAh (40Ah) 88.8V solid state UAV battery is a high-voltage drone battery pack for industrial multirotor and VTOL projects, including aerial mapping, infrastructure inspection and cargo transport. Its 24S1P configuration combines 24 cells in series, with a 102 V charge cut-off. Pack dimensions, connections and operating limits are listed below for aircraft selection and integration.
Request a 24S 40Ah battery quote · See pack specifications

Solid state UAV battery for VTOL, multirotor and cargo aircraft
This 24S 40000mAh (40Ah) 88.8V solid state UAV battery is a 24S1P high-voltage pack for industrial aircraft designed around an 88.8V system. Confirm the recommended 60–102V operating range and 102V charge cut-off against the propulsion system, power distribution and charger before reviewing installation.
On a VTOL platform, start with take-off and transition current against this pack’s 200A (5C) maximum continuous discharge rating; the finished harness and SB-175A connection still need separate approval for the ordered assembly. On a mapping or inspection multirotor, compare the finished mass of approximately 9.35kg and the maximum 225 × 245 × 93mm body envelope with the battery bay, cable exits and restraints. On a cargo UAV, plan battery-change access around that same body, the 250 ± 20mm power lead and the mating connectors.
Dimensions and cable routing
The body envelope is a maximum of 225 × 245 × 93mm, with X along the lead exit, Y across the body and Z as thickness. Use the drawing to check the battery bay, cable exits and connector access. Reserve space for cable bends, mating plugs, restraints and pack removal. Refer to the specification table for detailed tolerances and connector references.

Technical specifications
Electrical ratings
| Parameter | Specification |
|---|---|
| Battery type | Solid state battery pack |
| Configuration | 24S1P; 24 cells in series, one parallel string |
| Nominal voltage | 88.8 V |
| Nominal capacity | 40000 mAh / 40 Ah, at 0.2C and 25 ± 2 °C |
| Minimum capacity | 39 Ah, at 0.2C and 25 ± 2 °C |
| Nominal energy | 3552 Wh (calculated from 88.8 V × 40 Ah) |
| Charge cut-off voltage | 102 V |
| Recommended operating voltage range | 60–102 V |
| Discharge cut-off voltage | 60 V above 0 °C; 55.2 V at or below 0 °C |
| Charge current | 40 A (1C), maximum continuous |
| Continuous discharge current | 200 A (5C), maximum; the continuous capability of the finished harness and SB-175A connection must be approved separately for the ordered assembly |
| AC impedance | ≤45 mΩ at 1 kHz |
Finished pack and interfaces
| Item | Specification |
|---|---|
| Finished pack mass | Approximately 9.35 kg |
| X — parallel to lead exit | Maximum 225 mm |
| Y — transverse width | Maximum 245 mm |
| Z — body thickness | Maximum 93 mm |
| Outer covering | Black PVC film |
| Power connector | Anderson SB-175A |
| Power lead | 6 AWG silicone wire; length 250 ± 20 mm |
| Multipin connector | 26-position, 3-slot female; part 3-1437290-7 |
| Multipin lead length | 120 ± 15 mm |
Body dimensions exclude projecting leads and connector bodies. Lead lengths are listed separately above.
Charging and operating conditions
| Item | Specification |
|---|---|
| Standard charging method | At 25 ± 2 °C: 0.5C constant current to 102 V, then constant voltage at 102 V until current falls to ≤0.05C |
| Standard discharging method | At 25 ± 2 °C: 0.2C constant current to 60 V |
| Charging environment | 0 °C to 55 °C; maximum 90% RH |
| Discharging environment | −30 °C to 55 °C; maximum 90% RH |
Custom UAV battery pack options
New Journey’s custom OEM battery pack service can review this pack’s connections, cable layout, labelling and packaging against your installation requirements.
Include the following with your quotation request:
- The aircraft model or development platform, series count and permitted input-voltage range.
- Continuous current and peak current, including how long each peak lasts.
- Battery-bay dimensions, maximum pack mass and preferred cable routing.
- Charger details, mating connectors, polarity and multipin assignments.
- Sample quantity and any requested label or packaging changes.
Certification and documentation support
Below are redacted excerpts from documents obtained by the company. The documents required for your specific custom product, destination and transport method will be confirmed and coordinated during the quotation process.
These documents cover polymer lithium-ion cell model 54741773 (3.8V, 22500mAh, 85.5Wh) and are presented as company documentation. They are not model-specific certification or packaging and transport approval for the 24S 40Ah 88.8V finished battery pack.

No fixed expiry date printed.
View full-size excerpt ↗

No fixed expiry date printed.
View full-size excerpt ↗

Printed validity through 2026-11-30.
View full-size excerpt ↗
Questions before ordering
Is 40000mAh the same as 40Ah?
Yes. Both describe this pack’s nominal capacity. At 88.8V nominal, the calculated energy is 3552Wh: 88.8V × 40Ah.
What charger does this 24S solid state battery need?
Check its output settings and charging profile against the charge cut-off, current limit and constant-current/constant-voltage method listed above. Send the charger model for review before specifying it for this pack.
Can the connectors or cable lengths be changed?
New Journey can review these changes for your ordered assembly. Include a drawing or part reference for the mating connector so the connection can be checked alongside the electrical and installation requirements in your enquiry.
Request a 24S 40Ah UAV battery quotation
Request a sample or custom configuration quote, or email chris@xztpower.com.
For a project using a 6S electrical system, see the 22.2V 6S 16000mAh (16Ah) semi-solid UAV battery. For the wider product range, explore New Journey UAV battery packs.
NEW JOURNEY






